Heritage Art Studios - Drawing Gallery Heritage Art Studios - Woodworking Gallery Heritage Art Studios - Painting Gallery
Heritage Art Studios - Home

Home > Woodworking

Small Boxes


IMG_7483_sm.jpg

10 files, last one added on Jan 27, 2011

Clocks Etc.


mantleclock.jpg

2 files, last one added on Nov 21, 2007

Carvings


soldier.jpg

5 files, last one added on Mar 19, 2007

Woodshop


IMG_0671.jpg

5 files, last one added on Jun 28, 2008

Model Ships in Wood


Connie5.jpg

5 files, last one added on Nov 21, 2007

Furniture


banding1.jpg

1 files, last one added on Sep 11, 2010


Random files - Woodworking
box3.jpg
116 viewsCarcase is Imbuye with walnut splines. Top is figured walnut surrounded by a flame maple frame. Inside of box is flame maple with a felt covered bottom.
IMG_0671.jpg
167 views
Flower.jpg
Flower110 viewsMorning glory carving of basswood w/mahogany base. Painted with acrylics and oils. 8"
Sold
Connie4.jpg
USS Constitution Cross section149 viewsAll parts made of wood and fashioned by hand except for a few cast metal parts. Rigging made by hand with a rope walk. Based upon a kit but reworked based upon US Navy measurements done during her refurbishing in 1927.
banding1.jpg
Banding274 viewsMy first try at making a Federal Style banding. This is 2 pieces of 1/32 maple veneer, 2 pieces of 1/32 dyed black pearwood, about 1/2" of Aspen then 2 more black pieces and 2 more maple. All glued together and then to be sliced off in 1/16" thick strips for inlays. The shaving was made with a block plane to flatten the edge.
Connie3.jpg
USS Constitution Cross section132 viewsAll parts made of wood and fashioned by hand except for a few cast metal parts. Rigging made by hand with a rope walk. Based upon a kit but reworked based upon US Navy measurements done during her refurbishing in 1927.
IMG_7581.jpg
Box 1209 viewsInside of box. Liner of quilted maple and inside of lid of birdseye maple.
Box2.jpg
Box1108 viewsSmall box. Case of chechen w/holly splines. Top is figured walnut with mahogany corners and butternut frame. Inside (not show) is curly maple with maple burl in lid. 3x6x3
Sold

Last additions - Woodworking
IMG_7483_sm.jpg
Box 2389 viewsCarcase of bloodwood, liner is tiger maple and top center panel is maple burl. 9x4x3.75Jan 27, 2011
IMG_7487_am.jpg
Box 2221 viewsBottom of box is of quilted maple and inside of lid is maple burl.Jan 27, 2011
IMG_7581.jpg
Box 1209 viewsInside of box. Liner of quilted maple and inside of lid of birdseye maple.Jan 27, 2011
IMG_7582.jpg
Box 1332 views9x4x4 Carcase of bloodwood, bottom of spalted elm, top of maple burl along with various other woods in smaller quantities.Jan 27, 2011
banding1.jpg
Banding274 viewsMy first try at making a Federal Style banding. This is 2 pieces of 1/32 maple veneer, 2 pieces of 1/32 dyed black pearwood, about 1/2" of Aspen then 2 more black pieces and 2 more maple. All glued together and then to be sliced off in 1/16" thick strips for inlays. The shaving was made with a block plane to flatten the edge.Sep 11, 2010
IMG_0671.jpg
167 viewsJun 28, 2008
IMG_0672.jpg
150 viewsJun 28, 2008
IMG_0676.jpg
171 viewsJun 28, 2008

Powered by CyberDezign